DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This energy unit includes a energy up gravity down circuit. Commence the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve might be offered if necessary. Also a pressure compen sated movement control may be additional to the circuit to regulate the descent speed in the cylinder.
Remark: Please talk to our product sales engineer to the distinct pump displacement, motor electrical power or tank capability.
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. The power unit needs to be mounted horizontally.
5. Check the oil level from the tank just after the original working of your energy unit.
6. Oil shifting is required right after the preliminary a hundred operation hrs, afterwards the moment every single 3000 hours.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This power unit has a electrical power up power down circuit with load holding on both A & B ports. A stress compensatred flow control could be added to circuit to control the decent speed on the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned before installation of the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and free of impurities. N46 hydraulic oil is advisable.
four. The electrical power unit must be mounted horizontally.
five. Check the oil level during the tank following the first running from the power unit.
6. Oil modifying is needed soon after the original a hundred operation hrs, afterwards once each 3000 hours.