1.A connecting link of an O-ring Chain for common application is pre-coated with grease with the pins. Before connection, confirm the grease about the surfaces of pins, and in the event the amount of grease is compact, apply grease with bare hands. (If gloves are made use of, the grease are going to be absorbed through the gloves.)
Illustration: Once the connecting website link (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots on the pins. Should the O-rings come loose as a consequence of vibration all through transport, refit the O-rings in to your roots from the pins.
In this instance, make sure you return the grease collected at the roots of the pins to your central surfaces from the pins, more at portion A than at portions B proven in the above illustration. (Portions A is worn as a consequence of sliding together with the bushings.)
two.The chain could be most easily connected to the teeth of the sprocket. Engage the backlinks at the two ends on the chain with all the sprocket teeth and fit connecting pins. If the sprocket is usually moved, the chain may also be connected on the loosened side.
three. Connecting method
1.Verify that O-rings are connected on the roots with the pins.
2.In the event the level of grease utilized over the connecting pins is smaller, coat the pins with grease in the central portions.
three.Insert the connecting pins into the bushings in the inner back links at each ends.
4.Confirm that the grease is applied towards the whole face of your O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and though pressing the connecting plate, install the spring clip. Confirm whether or not the head (the end with no split) of your spring clip is turned from the feeding path of the chain. (See the following illustration.)
six.Be sure to confirm that the spring clip is securely fitted while in the clip grooves of the connecting pins.
This completes jointing from the connecting link. Note that grease to the surfaces of connecting pins and O-rings may be eliminated through installation do the job. In this case, re-grease applying the grease on the surface on the base chain or the grease within the polyethylene bag in which the connecting hyperlink was contained.