ep

December 22, 2020

Highest wear resistance readily available by sealing grease among pins and bushings
The durability of chain is dramatically enhanced because grease is sealed between the pins and bushings by O-rings. The O-ring chain could be the most dependable model from the Greatest Daily life Chain Series with its great put on resistance even during the situations or environments the place chain servicing is hard.
Proposed makes use of.
?Conditions exactly where regular chain substitute is needed due to wear stretch
?Situations wherever lubrication throughout the services is not possible
?In an setting with substantially soil, sand, dust, etc.
?Applications that need strength larger than that of the sintered bushing roller chain
Other capabilities
?Decreasing noise. (The noise degree is three dB reduce in contrast to common roller chains.)
?Lowering vibration with the friction produced by O-Ring. (The power loss due to the friction is nearly negligible, because the frictional force concerning the pins and bushings is for normally from the applications.)
Variety of chains
The strength of an O-ring chain is almost exactly the same as that of a common roller chain. (Because the pins are longer than individuals of normal roller chain, the average rupture strength is somewhat lower.)
For selecting a suitable chain, refer to “Selection of Chains” .
Once the service ambient temperature is greater than 80° C, special heat resistant O-rings need to be utilized. In this instance, speak to us for much more information and facts.
Connecting links and offset back links
Two types of connecting backlinks are available: clearance fit and interference fit. When higher strength or sturdiness is required, use interference-fit connecting website link. Only 2POJ is accessible because the offset website link for all sizes.
Sprockets
O-ring chain uses longer pins than a normal roller chain. When working with multiplex O-ring chain, the common sprocket for multiplex chains can’t be utilized.
Caution
O-ring chain is not advisable in applications the place solvents or other substances might assault “Nitric Rubber”. Exclusive materials O-rings may also be obtainable for these problems: Please seek advice from us for specifics. On the whole, “Nitric Rubber” is damaged by contact using the following chemical products.